ACS3-SS Stainless Steel Imperial Cables

Threaded Swage Terminal – Threaded Swage Terminal

 

ACS3-SS Stainless Steel Imperial Cables

PRODUCT Cable Ø TurnbuckleType Cable Construction C. B. L.* C. B. L.* C. B. L.*
No. mm     kN kg lb.
 3.175 Type 10 1×19 7.1 727 1,600
 3.969 Type 10 1×19 11.2 1,143 2,520
 4.763 Type 10 1×19 16.0 1,633 3,600
 5.556 Type 10 1×19 21.5 2,188 4,810
 6.350 Type 10 1×19 27.6 2,817 6,210
 7.144 Type 10 1×19 37.5 3,829 8,420
 7.938 Type 10 1×19 42.4 4,327 9,540
 9.525 Type 10 1×19 59.3 6,042 13,320
 11.113 Type 10 1×19 80.2 8,181 18,000
 12.700 Type 10 1×19 104.1 10,614 23,400
 14.288 Type 10 1×19 129.7 13,227 29,100
 15.875 Type 10 1×19 164.2 16,738 36,900
 19.050 Type 10 1×19 192.2 19,595 43,200
 22.225 Type 10 1×19 256.3 26,127 57,600
 25.400 Type 10 1×19 358.3 36,531 80,300

 

*C.B.L.= Characteristic Breaking Load; includes the typical 10% reduction in cable strength due to swaging

 

  • NOTE: Imperial Cables are available ex. North America only – Contact our North American office for full details.
  • Cable length between fittings must be minimum 50 times cable diameter (Ø) for 1×19 construction.

 

It comes down to function. No slick copy here. Simple, efficient, effective, slimline and minimalist; all words commonly used to describe ACS3, the cable with threaded ends for positive connection. If a static load needs to be carried or braced between two aligned points, and you have access to both sides of the connection plates, then ACS3 is the economical cable for you, even more so if you select galfan over stainless for corrosion protection.

While the cable may be simple, designing connections can be a challenge. We understand the structure behind the cable and can help with the development of your solution.

 

Suitable for:

Ronstan Tensile Architecture
Top