Jaw Turnbuckle – Jaw
| PRODUCT | Cable Ø | Cable Construction | C. B. L.* | C. B. L.* | C. B. L.* |
| No. | mm | kN | kg | lb. | |
| 8.1 | 1 x 19 | 59.0 | 6,010 | 13,260 | |
| 10.1 | 1 x 19 | 93.0 | 9,480 | 20,900 | |
| 12.2 | 1 x 19 | 134 | 13,660 | 30,120 | |
| 14.1 | 1 x 37 | 181 | 18,450 | 40,690 | |
| 17.0 | 1 x 37 | 260 | 26,510 | 58,450 | |
| 20.1 | 1 x 37 | 367 | 37,420 | 82,500 | |
| 24.4 | 1 x 37 | 537 | 54,750 | 120,720 | |
| 28.3 | 1 x 37 | 722 | 73,620 | 162,310 | |
| 31.3 | 1 x 61 | 884 | 90,140 | 198,730 | |
| 36.3 | 1 x 61 | 1,189 | 121,240 | 267,290 |
*C.B.L.= Characteristic Breaking Load; includes the typical 10% reduction in cable strength due to swaging.
Cable length between fittings must be minimum 50 times cable diameter (Ø) for 1×19 and 1×37 construction.
Cable length between fittings must be minimum 70 times cable diameter (Ø) for 1×61 construction.
If we sought a cable product to reflect function, purpose and longevity, ACS2 would have to be it. Resplendent in stainless steel or galfan coated carbon steel, this cable is tried and true. The carefully selected corrosion resistant materials reflect experience that has seen our products valued for their integrity and performance in the harshest of marine and architectural conditions.
And with two styles of end fittings tailored to the diameters they service, you need only specify the corrosion protection (stainless or Galfan), and select a diameter to know that your cable will perform to its design capabilities well into the future.
Suitable for:
