ACS3-SS Stainless Steel Cables

Threaded Swage Terminal – Threaded Swage Terminal

 

ACS3-SS Stainless Steel Cables

PRODUCT Cable Ø Cable Construction C. B. L.* C. B. L.* C. B. L.*
No. in.   kN kg lb.
0.118 1 x 19 6.7 684 1,508
0.157 1 x 19 11.9 1,215 2,677
0.197 1 x 19 18.5 1,890 4,167
0.236 1 x 19 26.7 2,720 5,997
0.276 1 x 19 36.5 3,720 8,201
0.315 1 x 19 47.5 4,840 10,670
0.394 1 x 19 74.4 7,580 16,711
0.472 1 x 19 107.1 10,920 24,074
0.551 1 x 19 145.8 14,860 32,761
0.630 1 x 19 189.9 19,360 42,681
0.748 1 x 19 268.1 27,330 60,252
0.866 1 x 19 359.9 27,330 60,252
1.024 1 x 19 502.2 36,690 80,888
1.126 1 x 61 578.0 51,190 112,855
1.264 1 x 91 730.0 74,480 164,020
1.441 1 x 91 945.0 96,420 212,330

 

*C.B.L.= Characteristic Breaking Load; includes the typical 10% redution in cable strength due to swaging

 

NOTE: Imperial Cables are available ex. North America only – Contact our North American office for full details.

  • Cable length between fittings must be minimum 50 times cable diameter (Ø) for 1×19 construction.
  • Cable length between fittings must be minimum 70 times cable diameter (Ø) for 1×61 and 1×91 construction. 

 

It comes down to function. No slick copy here. Simple, efficient, effective, slimline and minimalist; all words commonly used to describe ACS3, the cable with threaded ends for positive connection. If a static load needs to be carried or braced between two aligned points, and you have access to both sides of the connection plates, then ACS3 is the economical cable for you, even more so if you select galfan over stainless for corrosion protection.

While the cable may be simple, designing connections can be a challenge. We understand the structure behind the cable and can help with the development of your solution.

 

Suitable for:

Ronstan Tensile Architecture
© 2020 Ronstan Tensile Architecture. All rights reserved.
Top