ARS2-SS S520 Stainless Steel Rods

Fixed Jaw – Fixed Jaw

 

ARS2-SS S520 Stainless Steel Rods

PRODUCT Thread Rod Ø Rod Mass Adjustment +-
Per Assembly
*2 Adjustment +-
Per Turnbuckle If Used
* Max Single
Rod Length
Min. Yield Load Min. Ultimate Load
No.   in. lb/ft in. in. ft kips kips
M12 0.472 0.484 0.591 0.984 19.7 9.85 12.5
M16 0.630 0.934 0.591 0.984 19.7 18.30 23.3
M20 0.748 1.498 0.591 1.969 24.6 28.55 36.3
M24 0.866 2.002 0.787 1.969 24.6 41.36 52.3
M30 1.102 3.246 0.787 1.969 24.6 65.64 81.3
M36 1.339 4.791 0.787 1.969 24.6 95.54 121.2
M42 1.535 6.303 0.984 1.969 24.6 131.06 166.4
M48 1.772 8.386 0.984 1.969 24.6 152.20 201.9
M56 2.047 11.202 0.984 1.969 19.7 209.75 287.5

 

Connection Plates & Centre Discs

* Joiners or turnbuckles may be used if maximum rod length material is not available and./or to reduce shipping costs or time.
*2 Where turnbuckle is required in order: ARS2-SSxxxTB

 

A great all-rounder, ARS2 is the rod system that goes all the way, available right up to the largest stainless diameters our mills can provide. So when strength and aesthetics are still the driving design consideration, but exceed the capability of other stainless rods, ARS2 is the system to specify.

With the larger diameters requiring cast stainless forks, the fork design takes on a purpose and style reflective of strength and durability, but with uncompromised architectural form.

 

Suitable for:

Ronstan Tensile Architecture
© 2020 Ronstan Tensile Architecture. All rights reserved.
Top